Power Washing Services in Toronto and the GTA
Professional power washing in Toronto and the GTA that removes years of dirt, mildew, and chalking from driveways, decks, siding, brick, fences, and patios.
The power washing Toronto homeowners trust starts with the right equipment and the right technique. We use commercial-grade gas-powered pressure washers with adjustable PSI settings and matched nozzles for every surface — wide fan tips for siding, turbo nozzles for concrete, low-pressure soft-wash for wood. The wrong pressure on the wrong surface causes permanent damage. We've seen it. We don't do it.
Every exterior painting job we take on begins with a thorough wash, and for good reason: paint simply will not bond to a surface that carries dirt, chalk, algae, or mildew. Skipping this step means peeling paint within a season. Whether you're prepping for a fresh coat or just want clean curb appeal, power washing is the single highest-return thing you can do for the outside of your home or building.
We clean driveways, walkways, concrete patios, wood and composite decks, vinyl and wood siding, brick and stone facades, fences, and garage floors for both residential and commercial clients across Toronto and the GTA. Each surface gets the correct detergent concentration and dwell time before rinsing, so stains, green algae, and years of grime come off cleanly without etching or splintering.
What's included
- Driveways, walkways, and garage floors pressure washed and rinsed clean
- Wood, composite, and concrete decks cleaned with surface-appropriate pressure and detergent
- Vinyl, wood, and fibre-cement siding soft-washed to remove dirt, mildew, and chalk
- Brick, stone, and stucco facades cleaned without mortar or surface damage
- Fences and patio structures washed and prepared for staining or painting
- Surface inspection report included — we flag rot, cracks, or failing caulk before work begins
Our process
- 1
Site walkthrough and surface assessment
We inspect every surface to be cleaned — checking for cracks, soft wood, loose mortar, or fragile caulk that need special handling before water hits them. This sets the pressure settings and detergent mix for each zone.
- 2
Pre-treatment and detergent application
Stubborn stains, heavy algae, and oil spots get a targeted detergent applied and given dwell time before any pressure is used, so we don't have to compensate with damaging pressure.
- 3
Systematic pressure washing by surface type
We work from the top down and from the building outward, using the correct PSI and nozzle for each material — lower pressure for wood and painted surfaces, higher for concrete and brick, soft-wash for siding.
- 4
Detail rinse and edge clearing
Every surface gets a final clean-water rinse to flush detergent residue and loosened grime. Expansion joints, corners, and edges are cleared so water drains away cleanly rather than pooling.
- 5
Dry inspection and handoff
Once surfaces have dried enough to evaluate, we walk the job with you and flag any areas of concern — soft deck boards, spalling concrete, failing caulk — before any painting or staining begins.
Power Washing cost guide
Every project is priced individually, but these typical ranges give you a realistic starting point. Your free written quote confirms the exact price — no surprises, no obligation.
| Driveway or walkway | $150 – $300 |
| Deck, fence, or patio | $200 – $400 |
| Full house siding or commercial unitPriced by surface area and access | $350 – $600 |
Ranges are estimates for the Toronto & GTA market and may vary with surface condition, prep, and product selection.
Ready to get a price?
Submit photos online and Reza will send a written estimate within 24 hours — no site visit required for most jobs.
Get a Free QuotePower Washing — frequently asked questions
- How much does power washing cost in Toronto?
- Power washing in Toronto starts at $150 for a driveway or walkway, $200 – $400 for a deck, fence, or patio, and $350 – $600 for full house siding or a commercial unit. Final price depends on surface area, level of soiling, and site access.
- Do I need to power wash before exterior painting?
- Yes — it's not optional. Paint bonds to the surface itself, and any layer of dirt, chalk, mildew, or algae sitting on top acts as a release agent. Washing before painting is the single most important prep step for paint longevity.
- Can power washing damage my siding or deck?
- It can, in the wrong hands. Wood and vinyl require lower pressure and wider fan nozzles than concrete. We set PSI and nozzle angle per material and never use a turbo nozzle on painted or wood surfaces.
- How long does a house power wash take to dry before painting?
- Most surfaces need 24–48 hours of dry time in normal summer conditions before primer or paint goes on. We factor this into the project schedule so there's no delay between washing and painting.
- Do you offer power washing as a standalone service or only with painting?
- Both. We do standalone power washing for clients who just want clean driveways, decks, or siding, and we include it as part of every exterior painting project we take on.
Power Washing across Toronto & the GTA
Sky Painting delivers power washing with the same crew and the same standards wherever you are. These are some of the areas we serve most — see your city for local details.
Free quote — within 24 hours.
Submit photos of your project and Reza will send a written estimate. Most quotes arrive same day.