Fence Painting and Staining in Toronto and the GTA
We clean, prep, and finish wood fences with professional-grade paint or stain that holds up to Toronto's freeze-thaw cycles and summer humidity.
The fence painting jobs Toronto homeowners regret are the ones done without proper prep. We start every job with a thorough power wash to strip dirt, mildew, and chalking old finish. Once dry, loose boards are re-nailed, raised grain is sanded, and any cracked or peeling areas are scraped back to bare wood before a drop of product touches the surface.
The choice between stain and paint matters more on a fence than on any other surface. Stain soaks into the wood fibres, flexes with seasonal movement, and is easier to maintain — it's the right call for cedar and pressure-treated lumber. Paint forms a harder film that hides discolouration well but can peel if applied to wood that hasn't fully dried or cured. We'll give you an honest recommendation based on your fence material, its current condition, and how long you want to go between maintenance coats.
Cedar fences benefit from a penetrating oil-based stain applied within a few years of installation, before the wood greys out and closes its pores. Pressure-treated lumber needs at least a full season to dry before it will accept a finish — rushing that step is one of the most common reasons fences peel. Spruce and pine board fences are thirstier and generally need re-coating every two to three years. We factor all of that in before we pick up a brush.
What's included
- Power washing and mildew treatment before any finish is applied
- Minor board repairs — re-nailing, replacing split pickets, filling gaps
- Sanding and scraping of peeling or rough areas
- Stain or paint applied with brush and roller for full coverage including edges and back-rails
- Two-coat finish on bare or weathered wood
- Clean site at end of each day — drop cloths, masking, and debris removal included
Our process
- 1
Measure and quote
We calculate total linear footage and flag any boards that need replacement before we can finish. You receive a written itemized quote within 24 hours.
- 2
Power wash and dry
The entire fence is power washed to remove dirt, algae, and old chalking finish. We allow a full drying period — at least 48 hours — before applying any product.
- 3
Prep and repair
Loose or popped nails are driven back, split pickets are replaced, and rough or peeling areas are hand-sanded or scraped until the surface is sound.
- 4
Apply finish
Stain or paint is applied by brush and roller in the number of coats the wood calls for. Back-rails, post tops, and cut ends get the same attention as the face boards.
- 5
Final walk-through
We walk the fence line with you at completion to check for any missed spots or drips, confirm coverage is even, and review the expected maintenance window for your finish.
Fence Painting cost guide
Every project is priced individually, but these typical ranges give you a realistic starting point. Your free written quote confirms the exact price — no surprises, no obligation.
| Short fence run | $300 – $600 |
| Average backyard fence | $600 – $1,100 |
| Large or double-sided fenceBoth sides, full prep and stain or paint | $1,100 – $1,500 |
Ranges are estimates for the Toronto & GTA market and may vary with surface condition, prep, and product selection.
Ready to get a price?
Submit photos online and Reza will send a written estimate within 24 hours — no site visit required for most jobs.
Get a Free QuoteFence Painting — frequently asked questions
- How much does fence painting in Toronto typically cost?
- A short fence run starts around $300 – $600, an average backyard fence runs $600 – $1,100, and a large or double-sided fence with full prep is typically $1,100 – $1,500. The main variables are linear footage, whether both sides need coating, and the condition of the wood going in.
- Should I stain or paint my wood fence?
- Stain is the better choice for most wood fences — it penetrates rather than sitting on the surface, so it flexes with Toronto's freeze-thaw cycles and is far less likely to peel. Paint makes sense when you need to cover significant discolouration or match a specific colour exactly.
- How often does a fence need to be repainted or re-stained?
- Cedar and pressure-treated fences with a quality penetrating stain typically last four to six years before needing a maintenance coat. Spruce and pine board fences are more porous and usually need attention every two to three years.
- Can you paint a brand-new pressure-treated fence?
- Not right away. Pressure-treated lumber is loaded with moisture when it comes from the mill, and applying stain or paint before it dries is the single most common reason for early peeling. We recommend waiting a full season — ideally 12 months — before finishing a new pressure-treated fence.
- Do you paint both sides of the fence?
- We quote both sides separately so you're only paying for what you need. If your neighbour's side is accessible and you want it finished, we include that in the scope — both sides are priced in our large-fence tier. Single-sided is the default unless you tell us otherwise.
Fence Painting across Toronto & the GTA
Sky Painting delivers fence painting with the same crew and the same standards wherever you are. These are some of the areas we serve most — see your city for local details.
Free quote — within 24 hours.
Submit photos of your project and Reza will send a written estimate. Most quotes arrive same day.